Differences between revisions 1 and 5 (spanning 4 versions)
Revision 1 as of 2009-05-05 16:21:01
Size: 242
Comment:
Revision 5 as of 2009-05-06 10:05:52
Size: 925
Editor: AlexFinch
Comment:
Deletions are marked like this. Additions are marked like this.
Line 1: Line 1:
##acl T2KAdminGroup:read,write,delete,revert T2KUKCalibrationAdminGroup:read,write,delete,revert T2KUKUsersGroup:read,write #acl T2KAdminGroup:read,write,delete,revert T2KUKCalibrationAdminGroup:read,write,delete,revert T2KUKUsersGroup:read,write
Line 7: Line 7:
First of all to get your eye in, the simplest of the simple: a paricle going straight through the centre.
The way i have arranged things here has
 Left upper panel:: View from the side of the DsECal, (as you would see it from the counting room if the shield wasn't there)
 Left lower panel:: View from above the detector
 Right panel:: 3D display, generally looking from the same side as the Left lower pannel
'''The beam goes from right to left'''[[BR]]
attachment:eveDisp_simple1.jpg
attachment:eveDisp_simple2.jpg
Line 8: Line 16:
=== Here is a more complex example using timing cuts ===
Line 9: Line 18:
I am looking at event 8 from dsecal_00010114_0000.daq.mid

attachment:testbeameventnocuts.png

Some Event displays from beam running

Two easy events

First of all to get your eye in, the simplest of the simple: a paricle going straight through the centre. The way i have arranged things here has

Left upper panel
View from the side of the DsECal, (as you would see it from the counting room if the shield wasn't there)
Left lower panel
View from above the detector
Right panel
3D display, generally looking from the same side as the Left lower pannel

The beam goes from right to leftBR attachment:eveDisp_simple1.jpg attachment:eveDisp_simple2.jpg

Here is a more complex example using timing cuts

I am looking at event 8 from dsecal_00010114_0000.daq.mid

attachment:testbeameventnocuts.png


["Calibration"]

Calibration/Testbeam/EventDisplays (last edited 2009-07-13 20:19:59 by localhost)